MTK META Utility V43
Whats New MTK META Utility V43 :
- Improved Samsung force brom from download mode operation without test point and added more devices.
- In this version we don't replace all preloader data, we only removed the first char of EMMC_BOOT1/UFS_LU0 buffer and replaced with FF.
- added list of preloader files for most common Samsung MTK devices to exit brom all BITs.
- added list of PIT files for most common Samsung MTK devices to exit rebuild partition table all BITs.
- Now the original PIT will be saved with the device model number and version to be used later for Rebuild PMT I Download Mode after Exit BootROM.
- The correct steps to Force/Exit BootROM mode, explained in the images below.
- After flash BL only via ODIN the device should boot normally to system if not booted and asked for VBMETA AVB verification for partitions except the preloader you need to flash full firmware (4 files with reparation option enabled).
- Fixed LG Preloader crash and port detection, the issue was caused due to two interfaces which are (USB MODEM & USB SERIAL),
- So now you can service LG devices which blocked bootrom via META Mode you can read/write NV partitions and (md1img, protect partitions, proinfo).
- Added more META mode information full list of build properties which common in android devices.
- GUI fixed and software internal functions optimized.
- We're still working on a solution for one click exit brom mode and boot to system normally and also working for KG locked devices hopefully will be ready soon in near future stay tuned.
- We still recommend using this function only for (A326B/U/W and A125F, A41) since these are the only devices we had in our lab.
a lot of users have reported that all Samsung MTK devices are ok with this method, but we recommend testing only with the mentioned list.
* Please don't try this method with :
- KG Locked devices.
- Devices with Sec Ctrl Status 0.
- Tracfone devices.